Click to enlarge |
Description |
Price |
|
Boathouse double cable winder
Made especially for boathouse lifts. Fits 2" O.D. pipe winds two cable reversing on one winder. Aluminum made for years of service.
Please call 888-394-4556 to place your order! |
$ 46.99 |
|
Boathouse HD Dual Pipe Support
The Dual Pipe Support for wood mount is highly recommended in virtually any overhead lift application. This galvanized pipe support was designed to handle the overwhelming stress of an overhead lift. This pipe support's most notable feature is the individual sleeves for the pipe. This eliminates the pipe from "walking" up the side of the sleeve and guarantees a truer alignment of the pipe. It is designed to mount on wood joists with the fully adjustable brackets. The Dual Pipe Support will support the pipe on both sides of the cable, greatly reducing the chance of the unit getting into a bind. (Has grease fittings for easy maintenance.)
Overall dimensions: 3 3/4" W x 25 1/4" L x 17 1/2" H.
Recommended installation: Use when the pipe is mounted in the center or on the side of the slip.
Click here to review the overhead boatlift guide.
Please call us at 888-394-4556 to place an order!
|
$ 58.24 |
|
Boathouse HD Pipe Support
The Heavy Duty Pipe Support is a beefed up version of the Basic Pipe Support. It is hot dipped galvanized and has the "twist" in the flat piece of steel that allows the installer to have some adjustment when trying to line the supports up for the pipe. They are easy to hang and come with a grease zerk for proper maintenance. It is recommended that you use a pipe support every 10 feet and between the hoist and the first lifting point. On side mount applications, this pipe support can be used between dual pipe supports if the span is over 10 feet.
Overall dimensions: 12" W x 4" L x 11 3/4" H.
Recommended installation: Use when pipe is in the center of the slip only.
Click here to view the overhead boatlift guide.
Call us at 888-394-4556 to place an order today!
|
$ 28.50 |
|
3'' 1.5 Ton Block
3" 1.5 ton hot dipped galvanized block with ball bearings and grease fitting. The blocks are one of the most important parts of a boathouse lift. Bad blocks may cause friction when the cable rolls over the shive and add lifting weight to the lift. Underated blocks can become the weakest part of your lift. (4) blocks are required for lifts in a boathouse.
Please call 888-394-4556 to place an order. |
$ 33.50 |
|
4'' 3 Ton Block
These 4'' ball bearing blocks are the best blocks available for boat lifts. They are hot dipped galvanized 3 ton blocks with ball bearings and grease fittings. Blocks are one of the most important parts to a boat lift. Bad blocks will cause friction and will add weight to the hoist.
Please give us a call at 888-394-4556 to place your order today! |
$ 38 |
|
Weighted Compounding Bracket
Generally, once you compound a sling kit you can't add weight on the cable to hold tension. Not anymore, the Boat Hoist USA weighted compounding pulley adds weight to each side under the compounded pulley. All are hot dipped galvanized and easy to install. Set includes weight, shackle and strap (no block).
Please call 888-394-4556 to place an order today! |
$ 37.50 |
|
6 lb Lead Cable Weights
Use 6 lb weights to keep cables tight so they don't bounce and tangle while not in use.
To place an order, please call 888-394-4556.
|
$ 18.50 |
|
10 lb Lead Split Cable Weights
Use 10 lb split weights to keep cables tight so they don't bounce and tangle while not in use.
Please call 888-394-4556 to place your order today!
|
$ 27 |
|
4" x 12' Weighted Polyester Boat Slings
The 4'' x 12' Boat Hoist USA polyester boat slings for boat lifts come standard with lead weights sewn into the double thick keel pad. This keeps the slings from twisting and allows them to sink with ease. Unlike nylon, polyester does not stretch and is factory rated to give you peace of mind. The weight capacity of this sling is 8400#.
Please call 888-394-4556 to place your order! |
$ 69 |
|
4" x 14' Weighted Polyester Boat Slings
The 4'' x 14' Boat Hoist USA polyester boat slings for boat lifts come standard with lead weights sewn into the double thick keel pad. This keeps the slings from twisting and allows them to sink with ease. Unlike nylon, polyester does not stretch and is factory rated to give you peace of mind. The weight capacity of this sling is 8400#.
Please call 888-394-4556 to place your order! |
$ 75 |
|
4" x 16' Weighted Polyester Boat Slings
The 4'' x 16' Boat Hoist USA polyester boat slings for boat lifts come standard with lead weights sewn into the double thick keel pad. This keeps the slings from twisting and allows them to sink with ease. Unlike nylon, polyester does not stretch and is factory rated to give you peace of mind. The weight capacity of this sling is 8400#.
Please call 888-394-4556 to place your order! |
$ 81 |
|
6" x 14' Weighted Polyester Boat Slings
The 6'' x 14' Boat Hoist USA polyester boat slings for boat lifts come standard with lead weights sewn into the double thick keel pad. This keeps the slings from twisting and allows them to sink with ease. Unlike nylon, polyester does not stretch and is factory rated to give you peace of mind. The weight capacity of this sling is 12,000#.
Please call 888-394-4556 to place your order! |
$ 98 |
|
6" x 16' Weighted Polyester Boat Slings
The 6'' x 14' Boat Hoist USA polyester boat slings for boat lifts come standard with lead weights sewn into the double thick keel pad. This keeps the slings from twisting and allows them to sink with ease. Unlike nylon, polyester does not stretch and is factory rated to give you peace of mind. The weight capacity of this sling is 12,000#.
Please call 888-394-4556 to place your order! |
$ 105 |
